After Market Intake Installation
|Part Cost:||N/A Shipped|
|Best Place to buy:||You USED to be able to order them here, but it looks like they are gone. wadeperformanceproducts.com|
|Cost to Have it done in a shop:||N/A|
|How long it may take:||1 hour|
|Special tools needed:||None!|
1. Take out old airbox
2. You will need the good old 10mm socket:
Undo this bolt and just take the whole mount out. This is not needed, but very nice.
Take off this hose and take it apart:
Put on Part #2 onto the turbo.
Put on Part #1 onto part #2 (the air filter)
Attach the "Oil Separator" (#4) to somewhere. I had to attach it to the battery.
Take hose #13 and connect it like so to #5. Remember to use the brackets (#7)
Take Hose #11 and stick where the air box went into (Oil return). This goes into the bottom of the oil separator (#4) in the port that it's pointed towards.
Take that elbow and ...
Put #6 in and tighten it really well.
Put it all back together... like this:
BANISH that stuff forever!
yeah my driveway is dirty.
I have videos which I will upload and organize this better later...
--Dieselbenz 19:51, 6 September 2007 (PDT)