Rebuild Injectors

From Wiki
Jump to navigationJump to search
Project Box
Part Number(s): Complete Injector (0 432 217 134)
KC Nozzle Holder Assembly (0 430 211 056)
DN0SD240 (0 434 250 110)
Heat Shield (A 617 017 02 60)
Part Cost: $60 per new injector
$30 per nozzle
Best Place to buy: RockAuto (search complete part numbers, and visit car page)
Cost to Have it done in a shop: $15-30 per injector rebuild
Difficulty Level: Moderate, if rebuilding injectors
How long it may take: .5-2 hours per injector
Tools needed: Torque Wrench
Steel Brush
Special tools needed: Deep 27mm socket to clear injector overflow nipples
Pop Tester
Lapping Stone
Fine Sand Paper ~1000-2000

This is how to rebuild your injectors.

Error creating thumbnail: Unable to save thumbnail to destination