After Market Intake Installation

From Dieselbenz.info Wiki
Jump to: navigation, search
Project Box
Part Number(s): N/A
Part Cost: N/A Shipped
Best Place to buy: You USED to be able to order them here, but it looks like they are gone. wadeperformanceproducts.com
Cost to Have it done in a shop: N/A
Difficulty Level: 2
How long it may take: 1 hour
Frequency: Once
Tools needed: Standard
Special tools needed: None!

Click here to buy on ebay



Intake.jpg

1. Take out old airbox

Intake1.jpg

2. You will need the good old 10mm socket:

Intake3.jpg


Intake4.jpg


Intake5.jpg


Intake6.jpg


Intake7.jpg

Undo this bolt and just take the whole mount out. This is not needed, but very nice.


Intake8.jpg


Intake9.jpg


Intake10.jpg

Take off this hose and take it apart:

Intake11.jpg


Intake12.jpg


Intake13.jpg


Intake14.jpg


Put on Part #2 onto the turbo.

Intake15.jpg

Put on Part #1 onto part #2 (the air filter)

Intake16.jpg


Intake17.jpg

Attach the "Oil Separator" (#4) to somewhere. I had to attach it to the battery.

Intake19.jpg

Take hose #13 and connect it like so to #5. Remember to use the brackets (#7)

Take Hose #11 and stick where the air box went into (Oil return). This goes into the bottom of the oil separator (#4) in the port that it's pointed towards.

Intake18.jpg

Take that elbow and ...

Intake20.jpg

Put #6 in and tighten it really well.

Intake21.jpg

Put it all back together... like this:

Intake22.jpg


Intake23.jpg

BANISH that stuff forever!

Intake24.jpg

yeah my driveway is dirty.


I have videos which I will upload and organize this better later...

--Dieselbenz 19:51, 6 September 2007 (PDT)